The most energy-efficient UDOO NEO for your embedded system.
UDOO NEO BASIC is the perfect solution for low power consumption embedded systems.
You can use it as a Headless Device, exploiting USB and Ethernet ports. The board is compatible with most Arduino shields, sensors and actuators. UDOO NEO BASIC is also compatible with UDOO Bricks: programmable modules, like the temperature sensor and the barometric sensor, that you can add to make UDOO NEO BASIC even more versatile.
UDOO NEO BASIC can be powered in three ways. You can use:
– A standard 12 volts power supply, we recommend this one;
– A Micro USB cable like the one we have in our USB Kit;
– Any USB battery pack available on the market.
Freescale i•MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
Integrated 2d/3d graphics controller
Micro HDMI interface – LVDS interface + touch (I2C signals)
Analog camera connection supporting NTSC and PAL – 8-bit parallel camera interface
MicroSD card slot onboard – 8-bit SDIO interface
HDMI audio transmitter – S/PIDF & I2S
1x USB 2.0 Type A ports – 1x USB OTG (micro-AB connector)
Fast ethernet RJ45 10/100Mbps
3x UART ports – 2x CAN Bus interfaces
8x PWM signals – 3x I2C interface – 1x SPI interface – 6x multiplexable signals
Power Supply: 5 V DC Micro USB, 6-15 V DC Power Jack, RTC Battery Connector
Green Power Status LED – User Configurable LEDs (Red and Orange)
Dimensions: 89mm x59mm (3.50 x 2.32)
Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields
32 extended GPIOs (A9 dedicated) – 22 arduino GPIOs (M4 dedicated)
6 available Pins
Android Lollipop & Linux UDOObuntu2 (14.04 LTS)
nama / alamat lengkap / kode produk / jumlah -- kirim ke 0857.3048.2408
Jalan SMEAN 3 Nomor 4 Keputih Sukolilo (Depan SMKN 10 SBY) SURABAYA 60111