Saturday, 3 December 2016 - Buka 24 jam Nonstop !!! Hari Libur Slow Respon
Home » Arduino Shield » RFID NFC PN532 Shield
Keranjang Belanja Anda
Jumlah Barang : pcs
JumlahNama BarangTotal
0Rp 0,00
keranjang anda kosong

* Klik tombol di bawah ini untuk menyelesaikan pemesanan.

RFID NFC PN532 Shield

Ditambahkan pada : October 24th, 2014
Rp 320.000 Rp 342.000

Kode Produk :
Dilihat : 2,270 kali
Kategori : Arduino Shield
Bingung Cara Order / Pesan?
Customer Service www.JualArduinoMurah.com siap melayani dan membantu Anda.

Jual RFID NFC PN532 Shield Online Harga Murah

RFID NFC PN532 Shield

RFID NFC PN532 Shield

The perfect tool for any 13.56MHz RFID or NFC application. This NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and ‘act’ like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you’ll want to use!

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn’t require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones

Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags)

This shield was designed by RF engineers using the best test equipment to create a layout and antenna with 10cm (4 inch) range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier.

This shield is designed to use I2C or SPI communication protocols. I2C is the default, as it uses fewer pins: analog 4 and 5 are used for I2C (of course you can still connect other I2C devices to the bus). Digital #2 is used for “interrupt” notification. This means you don’t have to sit there and ‘poll’ the chip to ask if a target tag has been found, the pin will pull low when a card, phone, etc is within range. You can adjust which pin is used if you need to keep dig

 

KONTAK KAMI ( Fast Respond )
*Kami siap melayani Anda dengan sepenuh hati!
Hotline : 0857.3048.2408
SMS Center : 0857.3048.2408
BBM : D53A-CB39
Via Yahoo Messenger :

  • Abdul Majid Salas Al-Ghozali
    jangan ragu2 lagi kalian semua untuk membeli produk di toko ini, karena pelayananya memuaskn dan barang smpai »
  • Soes Hari Putra
    Paket sudah sampai gan.. Matap.. Rekomended seller... Layanan memuaskan, ampe malem tanya juga tetap direspon »
  • Arif J
    Barang sudah diterima. Pelayanan dan respon mantap Recommended seller pokoknya, sellernya jujur :) »
  • Lia valeria
    Pelayanannya baik, yg pny lapak jg baik (lia diberi potongan harga :D) terima kasih yah »
  • hidir
    Terimakasih, barang sudah diterima. »

Pengunjung

  • 650Pembaca hari ini:
  • 3Pengunjung online:
  • 247Pengunjung Hari Ini:
  • 389Pengunjung Kemarin:
  • 429Pengunjung perhari:
  • 133594Total Pengunjung:

  • Hotline: 0857.3048.2408
  • SMS/WA: 0857.3048.2408
  • BBM: D53A-CB39
  • arduinosurabaya@gmail.com