EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system. Note: The sensor cannot be used for medical purposes.
In standby mode, the output voltage is 1.5V. When detect muscle active, the output signal rise up, the maximum voltage is 3.3V. You can use this sensor in 3.3V or 5V system.
6 Disposable Surface Electrodes
Power supply voltage: 3.3V-5V
1000mm Cable Leads
No additional power supply
When finish downloading demo code, it’ll take about 5s to initialize, you should keep static when initializing.
You can see that when initializing, the Led Bar will go form level 10 to level 0. When Led Bar All off, you can move now.
When you are moving, you can find that the level of Led Bar will change.
Demo Code https://github.com/Seeed-Studio/Grove_EMG_detector_demo_code
Please visit our wiki page for more info about this product.
nama / alamat lengkap / kode produk / jumlah -- kirim ke 0857.3048.2408
Jalan SMEAN 3 Nomor 4 Keputih Sukolilo (Depan SMKN 10 SBY) SURABAYA 60111