Buka jam 08.00 s/d jam 21.00 , Sabtu- Minggu libur
Beranda » Development Board » ST-LINK/V2 In-Circuit Debugger/Programmer

ST-LINK/V2 In-Circuit Debugger/Programmer

Ditambahkan pada: 10 October 2015 / Kategori:
OFF 29%
Kode : -
Stok : Ready Stock
Dilihat : 61 kali
Review : Belum ada review
Rp 290.000 Sebelum Rp 410.000
(OFF 29%) Hemat Rp 120.000
Pesan!
Pesan melalui SMS? Klik SMS
Bayar di tempat? Klik COD

Bagikan informasi tentang ST-LINK/V2 In-Circuit Debugger/Programmer kepada teman atau kerabat Anda.

Deskripsi ST-LINK/V2 In-Circuit Debugger/Programmer

Jual ST-LINK V2 In-Circuit Debugger-Programmer

Jual ST-LINK V2 In-Circuit Debugger-Programmer

Jual ST-LINK V2 In-Circuit Debugger-Programmer

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

Features
5 V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
SWIM specific features
1.65 V to 5.5 V application voltage supported on SWIM interface
SWIM low-speed and high-speed modes supported
SWIM programming speed rate: 9.7 Kbytes/s in low speed
and 12.8 Kbytes/s in high speed
SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
SWIM cable for connection to the application via a pin
header or a 2.54 mm pitch connector

JTAG/serial wire debugging (SWD) specific features
1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
JTAG supported
SWD and serial wire viewer (SWV) communication supported
Direct firmware update feature supported (DFU)
Status LED which blinks during communication with the PC
Operating temperature 0 to 50 C

Belum ada review untuk ST-LINK/V2 In-Circuit Debugger/Programmer

Silahkan tulis review Anda

Your email address will not be published. Required fields are marked *

*

12345

Produk Terkait ST-LINK/V2 In-Circuit Debugger/Programmer

Mungkin Anda tertarik dengan produk terbaru kami.

OFF 5%
arduino mega 2560 | jualarduinomurah.com
Rp 190.000 Rp 200.000
Ready Stock
OFF 7%
Arduino Uno R3 | jualarduinomurah.com
Rp 130.000 Rp 140.000
Ready Stock
Kode: Uno R3
OFF 18%
Arduino Mega ADK | jualarduinomurah.com
Rp 450.000 Rp 550.000
Ready Stock
Kode: Arduino Mega ADK
Arduino Pro Micro ATmega32U4 5V 16MHz - Mini Leonardo | jualarduinomurah.com
Rp 120.000
Ready Stock
Kode: Pro Micro - Mini Leonardo
Jual Arduino Mini Atmega328 Harga Murah
Rp 60.000
Ready Stock
Kode: Arduino Mini Atmega328
OFF 28%
Jual Arduino DUE Harga Murah Grosir
Rp 290.000 Rp 400.000
Ready Stock
Kode: Arduino DUE
STOK HABIS
Description: Funduino Duemilanove 2009 unique is equipped with automatic recovery fuse If a short circuit, open circuit immediately. Restored after re-working. Which this product is used ATmega328p-pu, the chip has been with bootloader, without Purchase another download cable to burn bootloader. Package Included: 1 X Duemilanove 2009 1 X Kabel data
Rp 210.000
Habis
Kode: Duemilanove
OFF 29%
Arduino Sensor 37 in 1 kit
Rp 480.000 Rp 675.000
Ready Stock
Kode: K05001
OFF 32%
Arduino Nano R3
Rp 95.000 Rp 140.000
Ready Stock
Kode: Arduino Nano R3
Temukan Kami
Sidebar Kiri
Kontak
Cart
Sidebar Kanan